| Model |
Camera LiLin ER-212XA |
| Image Sensor/Sensor type | 1/2.9″ SONY |
| Lens | 2.8-12mm |
| Infrared LED Quantity | 36pcs IR LED |
| Max IR distance | 30m IR Range |
| Min. illumination/Low Light Mode (Colour) | Color 0.1Lux@F1.2, white/black 0.01Lux@F1.2 |
| S / N Ratio | ≥50dB(AGC OFF) |
| Video Compression | H264，Baseline/Main Profile/High Profile Encoding；MJPEG Encoding. Support 32Kbps-16Mbps continuous adjusting，support CBR/VBR；Adjustable frame rate from 1-30 fps/s. |
| Frame Rates | Main bit stream : 1920*1080，1-25(30) fps/s；1280*720，1-25(30) fps/s ; Sub bit stream : 720*576，1-25(30) fps/s；640*480，1-25(30) fps/s , 640*352，1-25(30) fps/s；320*240，1-25(30) fps/s |
| Audio interface | Support 1 route audio input;Audio output 1 road phenomenon |
| Audio | G.711 Encoding&Decoding Standard,support two-way voice intercom function |
| Network Interface/Ethernet | 1 RJ45 Ethernet port, 10/100M self-adjustable |
| Protocols | RTSP/FTP/PPPOE/DHCP/DDNS/NTP/UPnP |
| Wide Dynamic Range | ＞80dB |
| SD Card (recording) | Support Micro SD/SDHC/SDXC card for circular recording (card is not included) |
| Smart IR | support |
| Alarm Input | 1 CH input;low electrical effective |
| Alarm Output | 1 CH IO output |
| Other functions | Reset interface , Support WEB configuration, support OSD, support real-time video transmission, Support motion detection and IO alarm linkage for front storage / capture, support storage for front saving, support motion detection and IO alarm center to remind and screen linkage (Note: IO alarm and front storage limited functional type) Support MJPEG capture, support unit client-side remote management software and platform system application, Provide complete SDK development kit |
| PoE | Support |
| ONVIF | Onvif 2.4 |
| Mobile phone | Support IOS，Android |
| Power Supply | DC12V, 3.6W / PoE |
| Operating temperature | -10°C～55°C |
| IP Rating | IP66 |
